Conjuntos completos de Dado - Amana Tool

Carbide Tipped Dado Sets.

Prestige™ Super Fine Dado Set item no's 658060, 658060-1 & 658060C
For Solid Wood, Plywood & Laminated Material
1/4" to 29/32" Groove

A stacking dado set is an ideal tool for cutting dadoes, grooves and tenons for strong mortise-and-tenon joinery. The Amana Tool® Prestige® dado set cuts perfectly smooth edges, flat-bottom cuts and grooves both along and across the grain that are free of splinters or rough edges. These dado ses are part of the renowned Prestige® line of superior performance blades.
Features the latest in cutting tool technology including massive tool-steel plates and precision ground carbide teeth. The 8" diameter, 24-tooth outside plates feature high ATB grind geometry with every sixth tooth flat ground for efficient chip removal. Note: #658060C is coated with Electro-Blu™ Non-Stick Coating 

• Industrial quality carbide tipped saw blades
• O conjunto acomoda os contraplacados de tamanho inferior aos actuais.
• Packed in a handy black-molded carrying case

Each of the six interior chippers features four teeth and the standard width capacity is 1/4" through 29/32." Adjustments can be easily made in 1/32" increments and even finer adjustments, as small as .002" can be made by using the supplied shim set.

Dado Set item no's 658040 & 658040-1
For Melamine and Fine Plywoods
1/4" to 13/16" Groove

8" x 44T set for super smooth cuts in cabinet grade plywoods and melamine. Dadoes (cross-grain cuts) and grooves (cuts with the grain) are cut efficiently on the table saw with a dado stack set producing a flat-bottom cut with chip-free edges.

The standard width capacity ranges from 1/4" to 13/16." Additional chippers may be purchased separately to expand the capacity beyond 13/16". The standard set consists of two outside saw blades and chippers.

• Industrial quality carbide tipped saw blades
• O conjunto acomoda os contraplacados de tamanho inferior aos actuais.
  
  

Dado Set item no's 656030, 658012, 65130, 65130-1 & 65120
For Solid Wood and Plywood
1/4" to 13/16" Groove

Dadoes (cross-grain cuts) and grooves (cuts with the grain) are cut efficiently on the table saw with a dado stack set.
The standard width capacity ranges from 1/4" to 13/16."

Additional chippers may be purchased separately to expand the capacity beyond 13/16" The standard set, regardless of diameter or tooth count, consists of two outside saw blades and chippers. The outside blades feature the alternate top bevel (ATB) grind with every sixth tooth flat ground (FT). See "Dado Combinations" chart below for additional components.

• Industrial quality carbide tipped saw blades
• O conjunto acomoda os contraplacados de tamanho inferior aos actuais.

Directrizes de segurança para lâminas de serra.